Protect-All Rapid Weld™

Protect-All Rapid Weld is an innovative installation system for Protect-All® flooring products. A faster and easier installation alternative to heat welding,
Protect-All Rapid Weld utilizes a chemical welding process that significantly reduces the amount of required labor. This process reduces installation time and downtime for customers.

This innovative approach to installation delivers a high-quality, waterproof flooring solution designed to support a range of rigorous tasks.

Protect-All Rapid Weld delivers fewer flooring seams

Protect-All Rapid Weld helps to reduce flooring seams by at least 80% compared to traditional 6-inch-square ceramic tiles.

The diagram below shows a typical 1,500-square-foot commercial kitchen, pieced together from 6-inch-square ceramic tiles. More than 6,400 linear feet (1.25 miles) of grouting is required. By comparison, only 750 linear feet of welding is required with the Protect-All flooring system, which helps to eliminate more than 80% of the seams.

Applications

Animal Care

Animal Care

Food Service

Food Service

Fitness

Fitness

Retail

Retail

Classic Series

Blue

Blue

Brown

Brown

Black

Black

Dark Gray

Dark Gray

Light Gray

Light Gray

Terra Cotta

Terra Cotta

More Information

  Units Result
Work Time minutes 4-6
Handling Strength minutes 15-20
Gap Fill in. 1/4
Strength    
Shear psi 1,750-2,800
Tensile psi 2,500-3,500
Temperature Range oF -40 to 250

 

 
 
 
1 Protect-All Flooring 5 Drain Ring
2 Two-Part Adhesive 6 Z-Bar
3 Protect-All Rapid-Weld 7 Standard Cove Base
4 Protect-All Cove Base 8 Seam Sealer

Interactive System Component Tool

PROTECT-ALL® FLOORING

5' x 8' sheets provide slip resistance while eliminating the need to regrout tile or recoat applied systems.

TWO-PART ADHESIVE

PA-295 (12-hr. set) – bonds floor to substrate.

PROTECT-ALL RAPID-WELDTM

Chemically bonds sheets together to create a monolithic flooring system.

COVE BASE

6” x 30´ rolls chemically welded to the floor and mechanically fastened to the wall.

PROTECT-ALL RAPID-WELD COVE BASE

Chemically bonds sheets together to create a monolithic flooring system.

E6100® SEALANT

Seals penetrations and terminations.

DRAIN RINGS

Stainless-steel rings protect floor termination points and act as a mechanical fastener to the substrate.

TRANSITION STRIPS

Stainless-steel strips provide edge protection at elevation changes and act as mechanical fastener to the substrate.

Z-BAR

Aluminum, stainless or PVC cove cap protects the top edge from damage and acts as a mechanical fastener to the wall.

OPTIONAL CORNER GUARDS

Stainless-steel protects high-traffic edges from damage.