Facility Owners

Why Protect-All® Flooring?

Protect-All  Flooring is a vinyl flooring option crafted from more than 90% pre-consumer recycled materials. It is designed to
offer protection against stains, water absorption and fire hazards in areas prone to water exposure, heavy foot traffic and substantial weight loads.

Our flooring features an entirely vinyl composition to ensure durability. In addition, designed to boost footing confidence, Protect-All Matte flooring is high-traction certified, offering extra protection in slip-prone areas. While Protect-All Gloss flooring has a UV-cured, factory-applied urethane wear layer is both scuff and scratch resistant. Protect-All is resistant to mildew and other bacterial growth, and remains non-corrosive even when subjected to chemicals, animal fats or grease.

Durable

Stands up to varying weight loads and temperatures

Sustainable

Sustainable

Manufactured from more than 90% recycled materials

Comfortable

Comfortable

Reduces leg fatigue and absorbs sound

Sanitary

Sanitary

Non-absorbent to a variety of substances, including grease, animal fats and chemicals

What type of installation is right for my facility?

Protect-All stands up to a variety of weight loads and temperatures, from steamy to subzero. Its resilient construction resists impacts and punctures often associated with heavy use. There are a variety of flooring and installation options that offer a resilient flooring solution for almost any application. 

Explore our Floor Finder to learn which installation and floor is right for you!

Floor Finder

Sizes

Interlocking Tiles

Interlocking Tiles

Sheets

Sheets

Roll Goods

Roll Goods

How can I purchase and install Protect-All?

Protect-All flooring is sold throughout North America and Canada through top wholesale distributors. 

We work with a network of quality installers who are certified to install Protect-All to ensure you have a floor that will stand the test of time. 

Contact our sales team today and we will direct you to the appropriate distributor and installation team.

Explore the most commonly asked questions on our FAQ page!

Commonly Asked Questions

Applications

Retail

Retail

Healthcare

Healthcare

Fitness

Fitness

Education

Education

Animal Care

Animal Care

Food Service

Food Service

Recommended Job Site Conditions

Protect-All highly recommends the complete removal of the existing flooring down to the subfloor for assurance of a structurally sound substrate and to ensure satisfactory adhesion of the recommended adhesives.

The installation should not begin until the work of all other trades has been completed. If the job requirements do not permit this, cover the floor with plywood or OSB to protect the subfloor, adhesive and Protect-All flooring before, during and after installation.

Designer Series

Graphite Ultra

Graphite Ultra

Northern Lights Ultra

Northern Lights Ultra

Cityscape Ultra

Cityscape Ultra

Glacier Ultra

Glacier Ultra

Classic Series

Blue

Blue

Brown

Brown

Black

Black

Dark Gray

Dark Gray

Burgundy

Burgundy

Green

Green

Light Gray

Light Gray

Terra Cotta

Terra Cotta

New Customizable Options 

View Opions B and C below!

 

Interested in Protect-All but would like to have a few samples to help you make a decision?

Request A Sample

More Information

  Test Method Units 0.25 in.
Weight ASTM D-751 oz./sf 25.16
Dynamic Coefficient of Friction ANSI A326.3   0.43
Coefficient of Friction ASTM D-695 Dry 0.88
Fire Test NFPA Type 1 Rated      
Critical Radiant Flux ASTM D-648 w/cm2 1.05
Burn Distance ASTM D-648 cm 12
Breaking Strength ASTM D-2047 lbs. 405 x 723
Compressive Strength ASTM D-751 psi 641
Elongation ASTM D-751 % 76.5 x 88.5
Tear Strength ASTM D-751 lbs. 76.5 x 84
Shore A Hardness     80-85
Bacteria and Mildew Resistance ASTM G-21   Pass
Resistance to Impact ASTM F-1265   Pass
 
1 Protect-All Flooring 5 Drain Ring
2 Two-Part Adhesive 6 Z-Bar
3 Protect-All Rapid-Weld 7 Standard Cove Base
4 Protect-All Cove Base 8 Seam Sealer

Interactive System Component Tool

PROTECT-ALL® FLOORING

5' x 8' sheets provide slip resistance while eliminating the need to regrout tile or recoat applied systems.

TWO-PART ADHESIVE

PA-295 (12-hr. set) – bonds floor to substrate.

PROTECT-ALL RAPID-WELDTM

Chemically bonds sheets together to create a monolithic flooring system.

COVE BASE

6” x 30´ rolls chemically welded to the floor and mechanically fastened to the wall.

PROTECT-ALL RAPID-WELD COVE BASE

Chemically bonds sheets together to create a monolithic flooring system.

E6100® SEALANT

Seals penetrations and terminations.

DRAIN RINGS

Stainless-steel rings protect floor termination points and act as a mechanical fastener to the substrate.

TRANSITION STRIPS

Stainless-steel strips provide edge protection at elevation changes and act as mechanical fastener to the substrate.

Z-BAR

Aluminum, stainless or PVC cove cap protects the top edge from damage and acts as a mechanical fastener to the wall.

OPTIONAL CORNER GUARDS

Stainless-steel protects high-traffic edges from damage.